HE new Caterpillar 16M3 Motor Grader features engineering enhancements that Cat says boost fuel economy, increase structural durability, simplify maintenance, add operator convenience and promote the safety of both the operator and those around the machine. The 16M3 is available in configurations to meet engine emissions standards worldwide.

The new Cat 16M3 Motor Grader is an ideal machine for building and maintaining mine haulage roads.

The 16M3 is an essential machine for building and maintaining mine haulage roads - to keep trucks running efficiently and at the lowest cost per tonne of material moved. The 16M3 has a 4.9-metre moldboard and an average operating weight of 32,411kg. The motor grader is optimally sized for operations using 136-tonne or smaller trucks.

The 16M3 features a Cat C13 ACERT engine with the Cat Optimized Variable-Horsepower system, which provides net power ratings from 290 to 348 horsepower. The engine is available in three configurations to satisfy global emissions standards: US EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final); Tier 3/Stage IIIA /Japan 2006 (Tier 3) equivalent; and Tier 2/Stage II/Japan 2001 (Tier 2) equivalent.

A new ECO mode, standard for Tier 2 equivalent and Tier 4 engines, is designed to improve fuel economy by optimizing engine speed to 1900 rpm in working gears when possible with no compromise in performance. This operator-selected feature delivers fuel savings estimated to be as much as 4 to 5%, compared with working in comparable light to moderate load applications with the system deactivated. An additional engine control system feature provides consistent power to the ground by continually adjusting the engine to compensate for power losses to the cooling fan.

Also new for the 16M3 is the OK-to-Start system, which automatically checks the engine coolant, engine oil and hydraulic oil levels when the key is turned to the on position. The system also monitors these levels and the trans-axle oil level during operation, and it alerts the operator if levels drop too low.

The Cat direct-drive, power-shift transmission, with eight forward and six reverse gears, incorporates the Cat Advanced Productivity Electronic Control Strategy system, designed to smooth gear changes and promote productivity. The modular trans-axle now has a standard automatic differential lock, which ensures appropriate locking/unlocking for optimum traction and maneuvering, thus averting possible damage from ill-timed manual control.

The 16M3 also features nearly 15% greater dynamic braking torque at the rear tandems, achieved by enlarging both the brake disc diameter and the piston area. A new manual brake wear indicator simplifies disc wear measurement, eliminating having to remove the brake pods to check wear.

Resource Center Whitepapers, Videos, Case Studies

Conferences & Events

No events